.. _the-predefined-trait-editor-factories:

=====================================
The Predefined Trait Editor Factories
=====================================

This chapter contains individual descriptions of the predefined trait editor
factories provided by TraitsUI. Most of these editor factories are
straightforward and can be used easily with little or no expertise on the part
of the programmer or end user; these are described in :ref:`basic-trait-editor-factories`.
The section :ref:`advanced-trait-editors`
covers a smaller set of specialized editors that have more complex
interfaces or that are designed to be used along with complex editors.

.. NOTE:: Examples are toolkit-specific.

   The exact appearance of the editors depends on the underlying GUI toolkit.
   The screenshots and descriptions in this chapter contain a mix of both wx
   and Qt.

Rather than trying to memorize all the information in this chapter, you might
skim it to get a general idea of the available trait editors and their
capabilities, and use it as a reference thereafter.

.. _basic-trait-editor-factories:

Basic Trait Editor Factories
----------------------------

The editor factories described in the following sections are straightforward to
use. You can pass the editor object returned by the editor factory as the value
of the *editor* keyword parameter when defining a trait.

.. _arrayeditor:

ArrayEditor()
`````````````

:Suitable for:
    2-D Array, 2-D CArray
:Default for:
    Array, CArray (if 2-D)
:Optional parameter:
    *width*

The editors generated by ArrayEditor() provide text fields (or static text for
the read-only style) for each cell of a two-dimensional NumPy array. Only the
simple and read-only styles are supported by the wxWidgets implementation. You
can specify the width of the text fields with the *width* parameter.

This editor is only suitable for small arrays.  For editing large
two-dimensional arrays use the ArrayViewEditor instead

.. figure:: images/ArrayEditor_demo.png
   :alt: 3x3 integer; integer read-only; 4x4 float; float read-only

   Figure 21: Array editors

The following code generates the editors shown in Figure 21.

.. _example-14-demonstration-of-array-editors:

.. rubric:: Example 14: Demonstration of array editors

.. literalinclude:: ../../../traitsui/examples/demo/Standard_Editors/ArrayEditor_demo.py
   :start-at: ArrayEditor

BooleanEditor()
```````````````

:Suitable for:
    Bool, CBool
:Default for:
    Bool, CBool
:Optional parameters:
    *mapping*

BooleanEditor is one of the simplest of the built-in editor factories in the
TraitsUI package. It is used exclusively to edit and display Boolean (i.e,
True/False) traits. In the simple and custom styles, it generates a checkbox. In
the text style, the editor displays the trait value (as one would expect) as the
strings True or False. However, several variations are accepted as input:

- :samp:`'True'`
- ``T``
- ``Yes``
- ``y``
- :samp:`'False'`
- ``F``
- ``No``
- ``n``

The set of acceptable text inputs can be changed by setting the BooleanEditor()
parameter *mapping* to a dictionary whose entries are of the form *str*: *val*,
where *val* is either True or False and *str* is a string that is acceptable as
text input in place of that value. For example, to create a Boolean editor that
accepts only yes and no as appropriate text values, you might use the following
expression::

    editor=BooleanEditor(mapping={"yes": True, "no": False})

Note that in this case, the strings True and False would *not* be acceptable as
text input.

Figure 22 shows the four styles generated by BooleanEditor().

.. figure:: images/BooleanEditor_demo.png
   :alt: simple: checkbox; custom: checkbox; text: text field; read-only: read-only

   Figure 22: Boolean editor styles

ButtonEditor()
``````````````

:Suitable for:
    Button, Event, ToolbarButton
:Default for:
    Button, ToolbarButton
:Optional parameters:
    *height_padding*, *image*, *label*, *label_value*, *orientation*, *style*, *value*, *values_trait*, *view*, *width_padding*

The ButtonEditor() factory is designed to be used with an Event or Button [16]_
trait. When a user clicks a button editor, the associated event is fired.
Because events are not printable objects, the text and read-only styles are not
implemented for this editor. The simple and custom styles of this editor are
identical.

.. figure:: images/ButtonEditor_demo.png
   :alt: simple: button; custom: button; text style unavailable; read-only style unavailable

   Figure 23: Button editor styles

By default, the label of the button is the name of the Button or Event trait to
which it is linked. [17]_ However, this label can be set to any string by
specifying the *label* parameter of ButtonEditor() as that string.

Alternatively, use *label_value* to specify the name of the trait to use as the button label.

You can specify a value for the trait to be set to, using the *value* parameter.
If the trait is an Event, then the value is not stored, but might be useful to
an event listener.

Use *values_trait* to specify the name of the trait on the object that contains the list of possible values. If this is set, then the *value*, *label*, and *label_value* traits are ignored; instead, they will be set from this list. When this button is clicked, the value set will be the one selected from the drop-down.

.. _checklisteditor:

CheckListEditor()
`````````````````

:Suitable for:
    List
:Default for:
    (none)
:Optional parameters:
    *cols*, *name*, *values*

The editors generated by the CheckListEditor() factory are designed to enable
the user to edit a List trait by selecting elements from a "master list", i.e.,
a list of possible values. The list of values can be supplied by the trait being
edited, or by the *values* parameter.

The *values* parameter can take either of two forms:

- A list of strings
- A list of tuples of the form (*element*, *label*), where *element* can be of
  any type and *label* is a string.

In the latter case, the user selects from the labels, but the underlying trait
is a List of the corresponding *element* values.

Alternatively, you can use the *name* parameter to specify a trait attribute
containing the label strings for the values.

The custom style of editor from this factory is displayed as a set of
checkboxes. By default, these checkboxes are displayed in a single column;
however, you can initialize the *cols* parameter of the editor factory to any
value between 1 and 20, in which case the corresponding number of columns is
used.

The simple style generated by CheckListEditor() appears as a drop-down list; in
this style, only one list element can be selected, so it returns a list with a
single item. The text and read-only styles represent the current contents of the
attribute in Python-style text format; in these cases the user cannot see the
master list values that have not been selected.

The four styles generated by CheckListEditor() are shown in Figure 24. Note that
in this case the *cols* parameter has been set to 4.

.. figure:: images/CheckListEditor_demo.png
   :alt: simple: drop-list; custom: checkboxes; text and read-only: str() of the list

   Figure 24: Checklist editor styles

.. TODO: Change the demo and update the figure accordingly. The (value, label)
   option should also be demonstrated.

CodeEditor()
````````````

:Suitable for:
    Code, Str, String
:Default for:
    Code
:Optional parameters:
    *auto_set*

The purpose of a code editor is to display and edit Code traits, though it can
be used with the Str and String trait types as well. In the simple, text, and
custom styles (which are identical for this editor), the text is displayed in
numbered, non-wrapping lines with a horizontal scrollbar. The read-only style
is similar to the other styles except that the text is not editable.

.. figure:: images/CodeEditor_demo.png
   :alt: simple, custom, and read-only: multi-line, numbered, text field; text: single line text field

   Figure 25: Code editor styles

The *auto_set* keyword parameter is a Boolean value indicating whether the trait
being edited should be updated with every keystroke (True) or only when the
editor loses focus, i.e., when the user tabs away from it or closes the window
(False). The default value of this parameter is True.

.. _coloreditor:

ColorEditor()
`````````````

:Suitable for:
    Color
:Default for:
    Color
:Optional parameters:
    *mapped*

The editors generated by ColorEditor() are designed to enable the user to
display a Color trait or edit it by selecting a color from the palette available
in the underlying GUI toolkit. The four styles of color editor are shown in
Figure 26.

.. figure:: images/ColorEditor_demo.png
   :alt: simple and text: colored text field; custom: color picker; read-only: colored field

   Figure 26: Color editor styles

In the simple style, the editor appears as a text box. The text in the box is
either a color name or a tuple of the form (*r*, *g*, *b*) where *r*, *g*, and
*b* are the numeric values of the red, green and blue color components
respectively. (Which representation is used depends on how the value was
entered.) The text value is not directly editable in this style of editor;
instead, clicking on the text box displays a pop-up panel similar in appearance
and function to the custom style.

The custom style includes a labeled color swatch on the left, representing the
current value of the Color trait, and a palette of common color choices on the
right. Clicking on any tile of the palette changes the color selection, causing
the swatch to update accordingly. Clicking on the swatch itself causes a more
detailed, platform-specific interface to appear in a dialog box, such as is
shown in Figure 27.

.. figure:: images/color_picker_windows.jpg
   :alt: MS Windows color selection dialog box

   Figure 27: Custom color selection dialog box for Microsoft Windows XP

The text style of editor looks exactly like the simple style, but the text box
is editable (and clicking on it does not open a pop-up panel). The user must
enter a recognized color name or a properly formatted (*r*, *g*, *b*) tuple.

The read-only style displays the text representation of the currently selected
Color value (name or tuple) on a minimally-sized background of the corresponding
color.

**For advanced users:** The *mapped* keyword parameter of ColorEditor() is a
Boolean value indicating whether the trait being edited has a built-in mapping
of user-oriented representations (e.g., strings) to internal representations.
Since ColorEditor() is generally used only for Color traits, which are mapped
(e.g., 'cyan' to wx.Colour(0,255,255) ), this parameter defaults to True and is
not of interest to most programmers. However, it is possible to define a custom
color trait that uses ColorEditor() but is not mapped (i.e., uses only one
representation), which is why the attribute is available.


CompoundEditor()
````````````````

:Suitable for:
    special
:Default for:
    "compound" traits
:Optional parameters:
    *auto_set*


An editor generated by CompoundEditor() consists of a combination of the editors
for trait types that compose the compound trait. The widgets for the compound
editor are of the style specified for the compound editor (simple, custom,
etc.). The editors shown in Figure 28 are for the following trait, whose value
can be an integer between 1 and 6, or any of the letters 'a' through 'f'::

    compound_trait = Trait(1, Range(1, 6), 'a', 'b', 'c', 'd', 'e', 'f')

.. figure:: images/CompoundEditor_demo.png
   :alt: simple: slider for numbers, drop-list for letters; custom: radio buttons for both

   Figure 28: Example compound editor styles

The *auto_set* keyword parameter is a Boolean value indicating whether the trait
being edited should be updated with every keystroke (True) or only when the
editor loses focus, i.e., when the user tabs away from it or closes the window
(False). The default value of this parameter is True.

CSVListEditor()
````````````````

:Suitable for:
    lists of simple data types
:Default for:
    none
:Optional parameters:
    *auto_set*, *enter_set*, *ignore_trailing_sep*, *sep*

This editor provides a line of text for editing a list of certain simple
data types.  The following List traits can be edited by a CSVListEditor:

* List(Int)
* List(Float)
* List(Str)
* List(Enum('string1', 'string2', `etc`))
* List(Range(low= `low value or trait name`, high= `high value or trait name`))

The 'text', 'simple' and 'custom' styles are all the same.  They provide a
single line of text in which the user can enter the list.  The 'readonly'
style provides a line of text that can not be edited by the user.

The default separator of items in the list is a comma.  This can be
overridden with the *sep* keyword parameter.

.. figure:: images/CSVListEditor_demo.png

   Figure 29: Example CSV list editor styles

Parameters
::::::::::
*auto_set* : bool
    If *auto_set* is True, each key pressed by the user triggers validation of the
    input, and if it is valid, the value of the object being edited is
    updated.
    `Default:` True
*enter_set* : bool
    If *enter_set* is True, the input is updated when the user presses the `Enter`
    key.
    `Default:` False
*sep* : str or None
    The separator of the list item in the text field.  If `sep` is None,
    each contiguous span of whitespace is a separator. (Note: After the
    text field is split at the occurrences of `sep`, leading and trailing
    whitespace is removed from each item before converting to the underlying
    data type.)
    `Default:` ',' (a comma)
*ignore_trailing_sep* : bool
    If *ignore_trailing_sep* is True, the user may enter a trailing separator (e.g. '1, 2, 3,')
    and it will be ignored.  If this is False, a trailing separator is an
    error.
    `Default:` True

See Also
::::::::
ListEditor, TextEditor


DateEditor()
````````````

:Suitable for:
    Date, List(Date) (custom style only)
:Default for:
    Date
:Optional parameters:
    *allow_future*, *message*, *months*, *multi_select*, *on_mixed_select*,
    *padding*, *shift_to_select*, *selected_style*, *strftime*, *view*

The DateEditor() displays a Python datetime.date object, usually supplied via a
Date trait.  The simple style shows a date spin control, while the custom style
shows one (or potentially more in the wx backend) months in a calendar view.
Dates can be restricted to past-only by setting *allow_future* to False.

The custom style can also be used for the selection of multiple dates as an
ordered list of dates by setting *multi_select* to True.  The styling of the
selected dates can be controlled via setting the *selected_style* to a
CellFormat() instance.

For readonly style, the user can set the message to display if the date value
is None, and a date format string for use with strftime.


DatetimeEditor()
````````````````

:Suitable for:
    Datetime
:Default for:
    Datetime
:Optional parameters:
    *maximum_datetime*, *message*, *minimum_datetime*, *strftime*

The DatetimeEditor() displays a Python datetime.datetime object, usually supplied
via a Datetime trait.  The simple style shows a datetime spin control, and maximum
and minimum selectable datetimes can be supplied to restrict the range of values.

For readonly style, the user can set the message to display if the datetime value
is None, and a datetime format string for use with strftime.

The DatetimeEditor is not yet available for the wxPython backend.

.. figure:: images/DatetimeEditor_demo.png

   Figure 30: Example Datetime editor styles


DirectoryEditor()
`````````````````

:Suitable for:
    Directory
:Default for:
    Directory
:Optional parameters:
    *entries*, *filter*, *filter_name*, *reload_name*, *truncate_ext*, *dclick_name*

A directory editor enables the user to display a Directory trait or set it to
some directory in the local system hierarchy. The four styles of this editor are
shown in Figure 29.

.. figure:: images/DirectoryEditor_demo.png
   :alt: simple: combo box with '...' button; custom: folder tree

   Figure 31: Directory editor styles

In the simple style, the current value of the trait is displayed in a combo box
to the left of a button labeled '...'. The user can type a new path directly
into the text box, select a previous value from the droplist of the combo box,
or use the button to bring up a directory browser panel similar to the custom
style of editor.

When the user selects a directory in this browser, the panel collapses, and
control is returned to the original editor widget, which is automatically
populated with the new path string.

The user can also drag and drop a directory object onto the simple style editor.

The custom style displays a directory browser panel, in which the user can
expand or collapse directory structures, and click a folder icon to select a
directory.

The text style of editor is simply a text box into which the user can type a
directory path. The 'readonly' style is identical to the text style, except that
the text box is not editable.

The optional parameters are the same as the FileEditor.

No validation is performed on Directory traits; the user must ensure that a
typed-in value is in fact an actual directory on the system.

.. _enumeditor:

EnumEditor()
````````````

:Suitable for:
    Enum, Any
:Default for:
    Enum
:Required parameters:
    for non-Enum traits: *values* or *name*
:Optional parameters:
    *cols*, *evaluate*, *mode*, *completion_mode* (Qt only), *use_separator*
    (Qt only), *separator* (Qt only)

The editors generated by EnumEditor() enable the user to pick a single value
from a closed set of values.

.. figure:: images/EnumEditor_demo.png
   :alt: simple: drop-list; custom: radio buttons; text: text; read-only: read-only

   Figure 32: Enumeration editor styles

The simple style of editor is a drop-down list box.  If *evaluate* is True
then the user can also enter text. The *completion_mode* parameter controls how
to display partially matching values, either as inline text when there is only
one matching enumeration, or as a popup menu of all possible matches.

The custom style is a set of radio buttons. Use the *cols* parameter to specify
the number of columns of radio buttons.

The text style is an editable text field; if the user enters a value that is not
in enumerated set, the background of the field turns red, to indicate an error.
You can specify a function to evaluate text input, using the *evaluate*
parameter.

The read-only style is the value of the trait as static text.

If the trait attribute that is being edited is not an enumeration, you must
specify either the trait attribute (with the *name* parameter), or the set of
values to display (with the *values* parameter). The *name* parameter can be an
extended trait name. The *values* parameter can be a list, tuple, or dictionary,
or a "mapped" trait.  When using *names* or *values*, the *use_separator* flag
replaces any occurences of the value specified by *separator* with a separator
in the pop-up menu, allowing grouping of entries (this is currently only
supported in the Qt backend).

By default, an enumeration editor sorts its values alphabetically. To specify a
different order for the items, give it a mapping from the normal values to ones
with a numeric tag. The enumeration editor sorts the values based on the numeric
tags, and then strips out the tags.

.. _example-15-enumeration-editor-with-mapped-values:

.. rubric:: Example 15: Enumeration editor with mapped values

.. literalinclude:: examples/enum_editor.py
   :start-at: enum_editor.py

The enumeration editor strips the characters up to and including the colon. It
assumes that all the items have the colon in the same position; therefore, if
some of your tags have multiple digits, you should use zeros to pad the items
that have fewer digits.


.. _fileeditor:

FileEditor()
````````````

:Suitable for:
    File
:Default for:
    File
:Optional parameters:
    *entries*, *filter*, *filter_name*, *reload_name*, *truncate_ext*, *dclick_name*, *dialog_style*

A file editor enables the user to display a File trait or set it to some file in
the local system hierarchy. The styles of this editor are shown in the
following Figure.

.. figure:: images/FileEditor_demo.png
   :alt: simple: text box with 'Browse' or '...' button; custom: file tree; text: text box; read-only: read-only

   Figure 33: File editor styles

The default version of the simply style displays a text box and a :guilabel:`Browse`
button. Clicking :guilabel:`Browse` opens a platform-specific file selection dialog box.
On the wx backend, if you specify the *entries* keyword parameter with an integer value to the
factory function, the simple style is a combo box and a button labeled :guilabel:`...`.
The user can type a file path in the combo box, or select one of *entries*
previous values. Support for the *entries* parameter is yet to be implemented on
the qt backend. Clicking the :guilabel:`...` button opens a browser panel similar to the
custom style of editor. When the user selects a file in this browser, the panel
collapses, and control is returned to the original editor widget, which is
automatically populated with the new path string.

For either version of the simple style, the user can drag and drop a file object
onto the control.

The custom style displays a file system browser panel, in which the user can
expand or collapse directory structures, and click an icon to select a file.

You can specify a list of filters to apply to the file names displayed, using
the *filter* keyword parameter of the factory function. For example, you could
use a *filter* value of ``['*.py']`` to display only Python source files.
You can also specify this parameter for the simple style, and it will be used
in the file selection dialog box or pop-up file system browser panel.
Alternatively, you can specify *filter_name*, whose value is an
extended trait name of a trait attribute that contains the list of filters.

The *reload_name* parameter is an extended trait name of a trait attribute that
is used to notify the editor when the view of the file system needs to be
reloaded.

The *truncate_ext* parameter is a Boolean that indicates whether the file
extension is removed from the returned filename. It is False by default, meaning
that the filename is not modified before it is returned.

The *dclick_name* parameter is an extended trait name of a trait event which is
fired when the user double-clicks on a file name when using the custom style.

When using the simple style, the *dialog_style* parameter controls the type of
file dialog that will open when the user clicks on the folder icon.  Setting the
value of ``open`` makes the control pop up an "Open File" dialog; setting the
value of `save` will result in a "Save As" dialog.

FontEditor()
````````````

:Suitable for:
    Font
:Default for:
    Font

A font editor enables the user to display a Font trait or edit it by selecting
one of the fonts provided by the underlying GUI toolkit. The four styles of this
editor are shown in Figure 32.

.. figure:: images/FontEditor_demo.png
   :alt: simple: text box; custom: text box with drop-lists for typeface and size

   Figure 34: Font editor styles

In the simple style, the currently selected font appears in a display similar to
a text box, except that when the user clicks on it, a platform-specific dialog
box appears with a detailed interface, such as is shown in Figure 33. When the
user clicks :guilabel:`OK`, control returns to the editor, which then displays the newly
selected font.

.. figure:: images/font_dialog_windows.jpg
   :alt: MS Windows font selection dialog box

   Figure 33: Example font dialog box for Microsoft Windows

In the custom style, an abbreviated version of the font dialog box is displayed
in-line. The user can either type the name of the font in the text box or use
the two drop-down lists to select a typeface and size.

In the text style, the user *must* type the name of a font in the text box
provided. No validation is performed; the user must enter the correct name of an
available font. The read-only style is identical except that the text is not
editable.

HistoryEditor()
```````````````

:Suitable for:
    string traits
:Default for:
    (none)
:Optional parameters:
    *entries*

HistoryEditor() generates a combo box, which allows the user to either enter a
text string or select a value from a list of previously-entered values. The same
control is used for all editor styles. The *entries* parameter determines how
many entries are preserved in the history list. This type of control is used as
part of the simple style of file editor; see :ref:`fileeditor`.

HTMLEditor()
````````````

:Suitable for:
    HTML, string traits
:Default for:
    HTML
:Optional parameters:
    *format_text*

The "editor" generated by HTMLEditor() interprets and displays text as HTML. It
does not support the user editing the text that it displays. It generates the
same type of editor, regardless of the style specified. Figure 34 shows an HTML
editor in the upper pane, with a code editor in the lower pane, displaying the
uninterpreted text.

.. figure:: images/html_code_editor.png
   :alt: formatted and unformatted HTML text

   Figure 34: Example HTML editor, with code editor showing original text

.. NOTE:: HTML support is limited in the wxWidgets toolkit.

   The set of tags supported by the wxWidgets implementation of the HTML editor
   is a subset of the HTML standard. It does not support style sheets or
   complex formatting. Refer to the
   `wxWidgets documentation <https://docs.wxwidgets.org/3.1/overview_html.html#overview_html_supptags>`_
   for details.

If the *format_text* argument is True, then the HTML editor supports basic
implicit formatting, which it converts to HTML before passing the text to the
HTML interpreter. The implicit formatting follows these rules:

- Indented lines that start with a dash ('-') are converted to unordered lists.
- Indented lines that start with an asterisk ('*') are converted to ordered
  lists.
- Indented lines that start with any other character are converted to code
  blocks.
- Blank lines are converted to paragraph separators.

The following text produces the same displayed HTML as in Figure 34, when
*format_text* is True::

    This is a code block:

        def foo ( bar ):
            print 'bar:', bar

    This is an unordered list:
     - An
     - unordered
     - list

    This is an ordered list:
     * One
     * Two
     * Three

ImageEditor()
`````````````

:Suitable for:
    (any)
:Default for:
    (none)
:Optional parameters:
    *image*, *scale*, *preserve_aspect_ratio*, *allow_upscaling*,
    *allow_clipping*

ImageEditor() generates a read-only display of an image. The image to be
displayed is determined by the *image* parameter, or by the value of the trait
attribute being edited, if *image* is not specified. In either case, the value
must be a Pyface ImageResource (pyface.api.ImageResource), or a string
that can be converted to one. If *image* is specified, then the type and value
of the trait attribute being edited are irrelevant and are ignored.

For the Qt backend *scale*, *preserve_aspect_ratio*, *allow_upscaling*, and
*allow_clipping* control whether the image should be scaled or not, and how
to perform that scaling.

ImageEnumEditor()
`````````````````

:Suitable for:
    Enum, Any
:Default for:
    (none)
:Required parameters:
    for non-Enum traits: *values* or *name*
:Optional parameters:
    *path*, *klass* or *module*, *cols*, *evaluate*, *suffix*

The editors generated by ImageEnumEditor() enable the user to select an item in
an enumeration by selecting an image that represents the item.

.. figure:: images/ImageEnumEditor_demo.png
   :alt: simple: single image button; custom: multiple images: text: "top right"; read-only: image

   Figure 35: Editor styles for image enumeration

The custom style of editor displays a set of images; the user selects one by
clicking it, and it becomes highlighted to indicate that it is selected.

The simple style displays a button with an image for the currently selected
item. When the user clicks the button, a pop-up panel displays a set of images,
similar to the custom style. The user clicks an image, which becomes the new
image on the button.

The text style does not display images; it displays the text representation of
the currently selected item. The user must type the text representation of
another item to select it.

The read-only style displays the image for the currently selected item, which
the user cannot change.

The ImageEnumEditor() function accepts the same parameters as the EnumEditor()
function (see :ref:`enumeditor`), as well as some additional parameters.

.. NOTE:: Image enumeration editors do not use ImageResource.

   Unlike most other images in the Traits and TraitsUI packages, images in the
   wxWindows implementation of image enumeration editors do not use the Pyface
   ImageResource class.

In the wxWidgets implementation, image enumeration editors use the following
rules to locate images to use:

#. Only GIF (.gif) images are currently supported.
#. The base file name of the image is the string representation of the value,
   with spaces replaced by underscores and the suffix argument, if any,
   appended. Note that suffix is not a file extension, but rather a string
   appended to the base file name. For example, if *suffix* is ``_origin`` and
   the *value* is 'top left', the image file name is
   :file:`top_left_origin.gif`.
#. If the *path* parameter is defined, it is used to locate the file. It can be
   absolute or relative to the file where the image enumeration editor is
   defined.
#. If *path* is not defined and the *klass* parameter is defined, it is used to
   locate the file. The *klass* parameter must be a reference to a class. The
   editor searches for an images subdirectory in the following locations:

    #. The directory that contains the module that defines the class.
    #. If the class was executed directly, the current working directory.
    #. If *path* and *klass* are not defined, and the *module* parameter is
       defined, it is used to locate the file. The *module* parameter must be
       a reference to a module. The editor searches for an images subdirectory
       of the directory that contains the module.
    #. If *path*, *klass*, and *module* are not defined, the editor searches
       for an images subdirectory of the traitsui.wx package.
    #. If none of the above paths are defined, the editor searches for an
       :file:`images` directory that is a sibling of the directory from which
       the application was run.

InstanceEditor()
````````````````

:Suitable for:
    Instance, Property, self, This
:Default for:
    Instance, self, This
:Optional parameters:
    *cachable*, *editable*, *id*, *kind*, *label*, *name*, *object*,
    *orientation*, *values*, *view*


The editors generated by InstanceEditor() enable the user to select an instance,
or edit an instance, or both.

Editing a Single Instance
:::::::::::::::::::::::::

In the simplest case, the user can modify the trait attributes of an instance
assigned to a trait attribute, but cannot modify which instance is assigned.

.. figure:: images/InstanceEditor_demo.png
   :alt: simple: button; custom: editors for instance traits; text and custom: str() of instance

   Figure 36: Editor styles for instances

The custom style displays a user interface panel for editing the trait
attributes of the instance. The simple style displays a button, which when
clicked, opens a window containing a user interface for the instance. The *kind*
parameter specifies the kind of window to open (see :ref:`stand-alone-windows`).
The *label* parameter specifies a label for the button in the simple interface.
The *view* parameter specifies a view to use for the referenced instance's user
interface; if this is not specified, the default view for the instance is used
(see :ref:`defining-a-default-view`).

The text and read-only styles display the string representation of the instance.
They therefore cannot be used to modify the attributes of the instance. A user
could modify the assigned instance if they happened to know the memory address
of another instance of the same type, which is unlikely. These styles can useful
for prototyping and debugging, but not for real applications.

Selecting Instances
:::::::::::::::::::

You can add an option to select a different instance to edit. Use the *name*
parameter to specify the extended name of a trait attribute in the context that
contains a list of instances that can be selected or edited. (See
:ref:`the-view-context` for an explanation of contexts.) Using these parameters
results in a drop-drown list box containing a list of text representations of
the available instances. If the instances have a **name** trait attribute, it is
used for the string in the list; otherwise, a user-friendly version of the class
name is used.

For example, the following code defines a Team class and a Person class. A Team
has a roster of Persons, and a captain. In the view for a team, the user can
pick a captain and edit that person's information.

.. _example-16-instance-editor-with-instance-selection:

Example 16: Instance editor with instance selection

.. literalinclude:: examples/instance_editor_selection.py
   :start-at: instance_editor_selection.py

.. figure:: images/ui_for_ex16.png
   :alt: Dialog box for a "team", with drop-list selection for "Team Captain"

   Figure 37: User interface for Example 16

If you want the user to be able to select instances, but not modify their
contents, set the *editable* parameter to False. In that case, only the
selection list for the instances appears, without the user interface for
modifying instances.

Allowing Instances
::::::::::::::::::

You can specify what types of instances can be edited in an instance editor,
using the *values* parameter. This parameter is a list of items describing the
type of selectable or editable instances. These items must be instances of
subclasses of traitsui.api.InstanceChoiceItem. If you want to
generate new instances, put an InstanceFactoryChoice instance in the *values*
list that describes the instance to create. If you want certain types of
instances to be dropped on the editor, use an InstanceDropChoice instance in the
values list.

.. TODO: Need an example here.

ListEditor()
````````````

:Suitable for:
    List
:Default for:
    List [18]_
:Optional parameters:
    *editor*, *rows*, *style*, *scrollable*, *trait_handler*, *use_notebook*

    The following parameters are used only if *use_notebook* is True:
    *deletable*, *dock_style*, *export*, *page_name*, *select*, *view*


The editors generated by ListEditor() enable the user to modify the contents of
a list, both by editing the individual items and by adding, deleting, and
reordering items within the list.

.. figure:: images/ListEditor_demo.png
   :alt: simple: single text box; custom and text: multiple text boxes; read-only: read-only list

   Figure 38: List editor styles

The simple style displays a single item at a time, with small arrows on the
right side to scroll the display. The custom style shows multiple items. The
number of items displayed is controlled by the *rows* parameter; if the number
of items in the list exceeds this value, then the list display scrolls. If the
*scrollable* parameter is False, the editor displays all objects in the list and
does not render the vertical scrollbar. The editor used for each item in the list
is determined by the *editor* and *style* parameters. The text style of list
editor is identical to the custom style, except that the editors for the items
are text editors. The read-only style displays the contents of the list as
static text.

By default, the items use the trait handler appropriate to the type of items in
the list. You can specify a different handler to use for the items using the
*trait_handler* parameter.

.. TODO: Add an example of a trait handler.

For the simple, custom, and text list editors, a button appears to the left of
each item editor; clicking this button opens a context menu for modifying the
list, as shown in Figure 39.

.. figure:: images/list_with_context_menu.png
   :alt: list editor with context menu

   Figure 39: List editor showing context menu

In addition to the four standard styles for list editors, a fifth list editor
user interface option is available. If *use_notebook* is True, then the list
editor displays the list as a "notebook" of tabbed pages, one for each item in
the list, as shown in Figure 40. This style can be useful in cases where the
list items are instances with their own views. If the *deletable* parameter is
True, a close box appears on each tab, allowing the user to delete the item; the
user cannot add items interactively through this style of editor.

.. figure:: images/notebook_list_editor.jpg
   :alt: tabbed instance editors

   Figure 40: Notebook list editor

LEDEditor()
```````````

:Suitable for:
    numeric traits
:Default for:
    (none)
:Optional parameters:
    *alignment, format_str*

LEDEditor() generates a display that resembles a "digital" display using
light-emitting diodes. All styles of this editor are the same, and are
read-only.

The *alignment* parameter can be 'left', 'center', or 'right' to indicate how
the value should be aligned within the display. The default is right-alignment.

.. figure:: images/led_editor.png
   :alt: LED-like display of 90452

   Figure 56: LED Editor with right alignment

ListStrEditor()
```````````````

:Suitable for:
    ListStr or List of values mapped to strings
:Default for:
    (none)
:Optional parameters:
    *activated, activated_index, adapter, adapter_name, auto_add, drag_move*,
    *editable, horizontal_lines, images, multi_select, operations*,
    *right_clicked, right_clicked_index, selected, selected_index, title*,
    *title_name*

ListStrEditor() generates a list of selectable items corresponding to items in
the underlying trait attribute. All styles of the editor are the same. The
parameters to ListStrEditor() control aspects of the behavior of the editor,
such as what operations it allows on list items, whether items are editable, and
whether more than one can be selected at a time. You can also specify extended
references for trait attributes to synchronize with user actions, such as the
item that is currently selected, activated for editing, or right-clicked.

.. figure:: images/ListStrEditor_demo.png
   :alt: list box displaying strings

   Figure 41: List string editor

NullEditor()
````````````

:Suitable for:
    controlling layout
:Default for:
    (none)

The NullEditor() factory generates a completely empty panel. It is used by the
Spring subclass of Item, to generate a blank space that uses all available extra
space along its layout orientation. You can also use it to create a blank area
of a fixed height and width.

RangeEditor()
`````````````

:Suitable for:
    Range
:Default for:
    Range
:Optional parameters:
    *auto_set*, *cols*, *enter_set*, *format*, *high_label*, *high_name*,
    *label_width*, *low_label*, *low_name*, *mode*

The editors generated by RangeEditor() enable the user to specify numeric values
within a range. The widgets used to display the range vary depending on both the
numeric type and the size of the range, as described in Table 8 and shown in
Figure 42. If one limit of the range is unspecified, then a text editor is used.

.. _range-editor-widgets-table:

.. rubric:: Table 8: Range editor widgets

+-----------------------------+-----------+-------------+----------+-----------+
|Data type/range size         |Simple     |Custom       |Text      |Read-only  |
+=============================+===========+=============+==========+===========+
|Integer: Small Range (Size   |Slider with|Radio buttons|Text field|Static text|
|0-16)                        |text box   |             |          |           |
+-----------------------------+-----------+-------------+----------+-----------+
|Integer: Medium Range (Size  |Slider with|Slider with  |Text field|Static text|
|17-101)                      |text box   |text box     |          |           |
+-----------------------------+-----------+-------------+----------+-----------+
|Integer: Large Range (Size > |Spin box   |Spin box     |Text field|Static text|
|101)                         |           |             |          |           |
+-----------------------------+-----------+-------------+----------+-----------+
|Floating Point: Small Range  |Slider with|Slider with  |Text field|Static text|
|(Size <= 100.0)              |text box   |text box     |          |           |
+-----------------------------+-----------+-------------+----------+-----------+
|Floating Point: Large Range  |Large-range|Large-range  |Text field|Static text|
|(Size > 100.0)               |slider     |slider       |          |           |
+-----------------------------+-----------+-------------+----------+-----------+

.. figure:: images/RangeEditor_demo.png
   :alt: slider with text box; radio buttons; text box; static text; spin box; large-range slider

   Figure 42: Range editor widgets

In the large-range slider, the arrows on either side of the slider move the
editable range, so that the user can move the slider more precisely to the
desired value.

You can override the default widget for each type of editor using the *mode*
parameter, which can have the following values:

- 'auto': The default widget, as described in Table 8
- 'slider': Simple slider with text field
- 'xslider': Large-range slider with text field
- 'spinner': Spin box with increment/decrement buttons
- 'enum': Radio buttons
- 'text': Text field

You can set the limits of the range dynamically, using the *low_name* and
*high_name* parameters to specify trait attributes that contain the low and high
limit values; use *low_label*, *high_label* and *label_width* to specify labels
for the limits.

RGBColorEditor()
````````````````

:Suitable for:
    RGBColor
:Default for:
    RGBColor
:Optional parameters:
    *mapped*

Editors generated by RGBColorEditor() are identical in appearance to those
generated by ColorEditor(), but they are used for RGBColor traits. See
:ref:`coloreditor` for details.

.. _seteditor:

SetEditor()
```````````

:Suitable for:
    List
:Default for:
    (none)
:Required parameters:
    Either *values* or *name*
:Optional parameters:
    *can_move_all*, *left_column_title*, *object*, *ordered*,
    *right_column_title*

In the editors generated by SetEditor(), the user can select a subset of items
from a larger set. The two lists are displayed in list boxes, with the candidate
set on the left and the selected set on the right. The user moves an item from
one set to the other by selecting the item and clicking a direction button
(:guilabel:`>` for left-to-right and :guilabel:`<` for right-to-left).

Additional buttons can be displayed, depending on two Boolean parameters:

- If *can_move_all* is True, additional buttons appear, whose function is to
  move all items from one side to the other (:guilabel:`>>` for left-to-right
  and :guilabel:`<<` for right-to-left).
- If *ordered* is True, additional buttons appear, labeled :guilabel:`Move up`
  and :guilabel:`Move down`, which affect the position of the selected item
  within the set in the right list box.

.. figure:: images/SetEditor_demo.png
   :alt: set editor list boxes with buttons

   Figure 43: Set editor showing all possible buttons

You can specify the set of candidate items in either of two ways:

- Set the *values* parameter to a list, tuple, dictionary, or mapped trait.
- Set the *name* parameter to the extended name of a trait attribute that
  contains the list.

ShellEditor()
`````````````

:Suitable for:
    special
:Default for:
    PythonValue

The editor generated by ShellEditor() displays an interactive Python shell.

.. figure:: images/shell_editor.jpg
   :alt: interactive shell pane

   Figure 44: Python shell editor

TextEditor()
````````````

:Suitable for:
    all
:Default for:
    Str, String, Password, Unicode, Int, Float, Dict, CStr, CUnicode, and
    any trait that does not have a specialized TraitHandler

:Optional parameters:
    *auto_set*, *enter_set*, *evaluate*, *evaluate_name*, *mapping*,
    *multi_line*, *password*

The editor generated by TextEditor() displays a text box. For the custom style,
it is a multi-line field; for the read-only style, it is static text. If
*password* is True, the text that the user types in the text box is obscured.

.. figure:: images/text_editor_integers.png
   :alt: simple: text box; custom: multi-line text box; text: text box; read-only: static text

   Figure 45: Text editor styles for integers

.. figure:: images/text_editor_strings.png
   :alt: simple: text box; custom: multi-line text box; text: text box; read-only: static text

   Figure 46: Text editor styles for strings

.. figure:: images/text_editors_passwords.png
   :alt: same as above, but with value obscured by asterisks

   Figure 47: Text editor styles for passwords

You can specify whether the trait being edited is updated on every keystroke
(``auto_set=True``) or when the user presses the Enter key (``enter_set=True``).
If *auto_set* and *enter_set* are False, the trait is updated when the user
shifts the input focus to another widget.

You can specify a mapping from user input values to other values with the
*mapping* parameter. You can specify a function to evaluate user input, either
by passing a reference to it in the *evaluate* parameter, or by passing the
extended name of a trait that references it in the *evaluate_name* parameter.


TimeEditor()
````````````

:Suitable for:
    Time
:Default for:
    Time
:Optional parameters:
    *minimum_datetime*, *strftime*

The TimeEditor() displays a Python datetime.time object, usually supplied
via a Time trait.  The simple style shows a time spin control.  For readonly
style, the user can set the message to display if the time value is None,
and a time format string for use with strftime.


TitleEditor()
`````````````

:Suitable for:
    string traits
:Default for:
    (none)

TitleEditor() generates a read-only display of a string value, formatted as a
heading. All styles of the editor are identical. Visually, it is similar to a
Heading item, but because it is an editor, you can change the text of the
heading by modifying the underlying attribute.


TupleEditor()
`````````````

:Suitable for:
    Tuple
:Default for:
    Tuple
:Optional parameters:
    *cols*, *editors*, *labels*, *traits*

The simple and custom editors generated by TupleEditor() provide a widget for
each slot of the tuple being edited, based on the type of data in the slot. The
text and read-only editors edit or display the text representation of the tuple.

.. figure:: images/TupleEditor_demo.png
   :alt: simple and custom: color editor, range editor, text box

   Figure 48: Tuple editor styles

You can specify the number of columns to use to lay out the widgets with the
*cols* parameter. You can specify labels for the widgets with the *labels*
parameter. You can also specify trait definitions for the slots of the tuple;
however, this is usually implicit in the tuple being edited.

You can supply a list of editors to be used for each corresponding tuple slot.
If the *editors* list is missing, or is shorter than the length of the tuple,
default editors are used for any tuple slots not defined in the list. This
feature allows you to substitute editors, or to supply non-default parameters
for editors.

ValueEditor()
`````````````

:Suitable for:
    (any)
:Default for:
    (none)
:Optional parameters:
    *auto_open*

ValueEditor() generates a tree editor that displays Python values and objects,
including all the objects' members. For example, Figure 49 shows a value editor
that is displayed by the "pickle viewer" utility in enthought.debug.

.. figure:: images/value_editor.png
   :alt: tree of Python values, including dictionaries, lists, and tuples

   Figure 49: Value editor from Pickle Viewer

.. rubric:: Footnotes

.. [16]  In Traits, a Button and an Event are essentially the same thing,
   except that Buttons are automatically associated with button editors.

.. [17]  TraitsUI makes minor modifications to the name, capitalizing the
   first letter and replacing underscores with spaces, as in the case of a
   default Item label (see :ref:`the-view-object`).

.. [18] If a List is made up of HasTraits objects, a table editor is used
   instead; see :ref:`tableeditor`.